<_root><_ver>12<_grp><_tocheck/><_lns>1.round().array_fill()$w$c$range$file<_rslv>$aTTFParser.ReadUShort()TTFParser.ReadULong()$c1TTFParser.ReadUShort()$segment$start$end$start.count()$tag.count().pack()<_rslv>.strlen()TTFParser.ReadUShort()TTFParser.ReadUShort().preg_replace()$char$id<_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv>$gn$gn$w$w$asc$i$gn<_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_rslv><_doc>r04A1CB51<_doc>r52714B16<_doc>rA868D316<_doc>r9D4B7777<_doc>rFD870EC6<_doc>r3FDB7B22<_doc>r6B884BBC<_doc>r9955D0B1<_doc>rFC129EFC<_doc>r3B86E02E<_doc>r344C0888<_doc>r0BBC152C<_doc>r2054BF59<_doc>r1301A951<_doc>rC64D5FD6<_doc>rC34055BD<_doc>r507DEB99<_doc>r4B97EF93<_doc>r5EFAE340<_doc>rE7C70E32<_doc>r23EED9D1<_doc>r8FC1C3F7<_doc>rCAABF367<_doc>rEF8785FB<_doc>r59DA12D0<_doc>r54B754E8<_doc>rACCCEECA<_doc>rDA39FB88<_doc>r33533CD6<_doc>r524BD8A8<_doc>r0DE54457<_doc>r958228C6<_doc>rF3C86185<_doc>r84EB6CAA<_doc>rFBB2E3FF<_doc>r0D53C2E1<_doc>r5D439799<_doc>rE78FB9B9<_doc>r239C88E8<_doc>rC1560F47<_doc>rDEABEAB7<_doc>r0653B4FF<_hsh>/**\n* Ceca\n* @package ceca\n* @author Eduardo Díaz\n* @since 1.0.0\n*//** \n * @var integer $_merchantID Requerido 9 Identifica al comercio. Facilitado por la caja en el proceso de alta\n *//**\n * @var integer $_acquirerBIN Requerido 10 Identifica la caja. Facilitado por la caja en el proceso de alta.\n *//**\n * @var integer $_terminalID Requerido 8 Identifica al terminal. Facilitado por la caja en el proceso de alta.\n *//**\n * @var string $_num_operacion Requerido 50\n *//** \n * @var float $_importe Requerido 12 Importe de la operación sin formatear. Siempre será un número entero donde los dos últimos dígitos serán los céntimos de Euro.\n *//**\n * @var string $_tipoMoneda Requerido 3\n *//**\n * @var integer $_tipoMoneda Requerido 1 Actualmente siempre será 2\n *//**\n * @var string $_url_ok Requerido 500 URL completa. \n *//**\n * \n * @var string $_url_nok Requerido 500 URL completa. \n *//**\n * @var string $_firma Requerido 256 Es una cadena de caracteres calculada por el comercio.\n *//**\n * @var string $_cifrado Requerido 4 Valor fijo SHA1.\n *//**\n * @var integer $_idioma Opcional 1 Código de idioma.\n * \n * 1.- Español 2.- Catalán 3.- Euskera 4.- Gallego 5.- Valenciano\n * 6.- Inglés 7.- Francés 8.- Alemán 9.- Portugués 10.- Italiano \n * 11.- Sueco 12.- Danés 13.- Ruso 14.- Holandés 15.- Noruego\n *//**\n * @var string $_pago_soportado Requerido 3 Valor fijo SSL.\n *//**\n * @var string $_descripcion Opcional 1000 Campo reservado para mostrar información extra en la página de pago.\n *//**\n * \n * @var string $_pago_elegido Opcional Dependiendo de quien solicite los datos de la tarjeta. Si los solicita el comercio será SSL. Si los solicita el TPV será vacío o no viajará.\n *//**\n * @var integer $_pan Opcional 19 Nº de tarjeta del cliente. Este campo tendrá contenido sólo en el caso de que la caja haya autorizado al comercio a solicitar este tipo de datos. En caso contrario dejarlo sin contenido.\n *//**\n * @var string $_caducidad Opcional 6 Fecha de Caducidad. Formato AAAAMM. Este campo tendrá contenido sólo en el caso de que la caja haya autorizado al comercio a solicitar este tipo de datos. En caso contrario dejarlo sin contenido.\n *//**\n * @var integer $_cvv2 Opcional CVC2 de la tarjeta. Este campo tendrá contenido sólo en el caso de que la caja haya autorizado al comercio a solicitar este tipo de datos. En caso contrario dejarlo sin contenido.\n *//**\n * @var string Referencia Opcional 30 Si el comercio está realizando el pago de una compra el campo viajará sin contenido. Si el comercio está realizando la anulación de una operación, se informará con el valor correspondiente.\n *//**\n * Pasarela final a la que se conectara\n * @var string $_urlPasarela\n *//**\n * URL para conectarse a la TPV en produccion\n * @var string\n *//**\n * URL para conectarse a la TPV en desarrollo\n * @var string\n *//**\n * Clave de encriptacion\n * @var string $_clave_encriptacion Cualquier valor\n *//**\n * Asignar código comercio \n * @param integer $merchantid Código identificativo del comercio (Proporcionado por el Comercio).\n *//**\n * Asignar código entidad\n * @param string $acquirerbin Código identificativo de su Caja (Proporcionado por el Comercio).\n *//**\n * Asignar url_ok\n * @param string $urlok Es la URL determinada por el comercio a la que Cecabank devolverá el control en el caso de que la operación finalice correctamente.\n * Esta URL no deberá utilizarse para actualizar la operación como pagada en el servidor del comercio.\n *//**\n * Asignar url_nok\n * @param string $urlnok Es la URL determinada por el comercio a la que Cecabank devolverá el control en el caso de que la operación no pueda realizarse por algún motivo.\n *//**\n * Asignar número de pedido\n * @param string $numoperacion Identifica para el comercio la operación, nº de pedido, factura, albaran, etc.… Puede ser alfanumérico pero están prohibidos los caracteres extraños típicos como ¿,?,%,&,*,etc.\n *//**\n * Asignar importe a pagar\n * @param string $importe Importe a pagar, se puede especificar con comas y puntos (Ejm. 10,67 / 10.32)\n *//**\n * Asignar el tipo de moneda\n * @param integer $tipomoneda Es el código ISO-4217 correspondiente a la moneda en la que se efectúa el pago. Contendrá el valor 978 para Euros.\n *//**\n * Asignar el ID del terminal\n * @param string $terminalid Código identificativo de un terminal dentro de un comercio. Por defecto es 00000003\n *//**\n * Asignar URL de producción\n * @param string $urlpasarelaproduccion Url del entorno de producción\n *//**\n * Asignar URL de desarrollo\n * @param string $urlpasareladesarrollo Url del entorno de desarrollo\n *//**\n * Asignar entorno\n * @param string $entorno Asignar el tipo de entorno que usaremos para comunicarnos con la TPV (por defecto modo desarrollo)\n *//**\n * Clave de encriptación\n * @param string $claveencriptacion Utilizada para firmar las llamadas realizadas al TPV. Las claves son distintas en pruebas y en real. (Proporcionado por el Comercio).\n *//**\n * Generar la firma\n * @return string Este método construye la firma con los parámetros anteriormente asignados\n *//**\n * Asignar el nombre del formulario\n * @param string nombre Nombre del formulario\n *//**\n * Asignar el id del formulario\n * @param string idform ID del formulario\n *//**\n * Generar boton submit\n * @param string nombre Nombre y ID del botón submit\n * @param string texto Texto que se mostrara en el botón\n *//**\n * Iniciar redirección automática\n * @return string Se ejecuta la redicción automática por javascript\n *//**\n * Creacion del formulario\n * @return string Retorna el formulario para la TPV\n */<_rslv>stringstringstringstringstringintegerstringintegerstringstringstringstring.intval()$btnsubmit<_doc>r5DA4716B<_doc>r4D1382E2<_doc>rC74066E9<_doc>rC0C64D02<_doc>rC9578C37<_doc>rD13AE358<_doc>rE91FE97C<_doc>r6D8BD0E3<_doc>r226E62DB<_doc>r41F0D9A6<_doc>r16038DBE<_doc>r82A7CA31<_doc>rEBAB483F<_doc>r691CC902<_doc>r91743EE5<_doc>r64D285B3<_doc>rD70A8161<_doc>r679649EC<_doc>rA48D9B2F<_doc>r9E98EDF6<_doc>r9DD8BA40<_doc>rF5F0161A<_doc>r597692EC<_doc>r22AAEA1E<_doc>rA88DECF8<_doc>r9669D0C4<_doc>rBECCD4BD<_hsh>/**\n * Class Sermepa\n *//**\n * Constructor\n *//**\n * Asignamos el idioma por defecto 001 = Español\n *\n * @param $codeidioma codigo de idioma [Castellano-001, Inglés-002, Catalán-003, Francés-004, Alemán-005, Holandés-006, Italiano-007, Sueco-008, Portugués-009, Valenciano-010, Polaco-011, Gallego-012 y Euskera-013.]\n *//**\n * Asignamos que tipo de entorno vamos a usar si Pruebas o Real (por defecto esta en pruebas)\n *\n * @param string $entorno (pruebas, real)\n *//**\n * Retornamos la URL que va en el form para los pagos ya sea en pruebas o real\n *\n * @return string URL sermepa (real o pruebas)\n *//**\n * Asignamos el importe de la compra\n *\n * @param int $importe total de la compra a pagar\n * @return bool|float|int Retornamos el importe ya modificado\n *//**\n * Asignamos el tipo de moneda\n *\n * @param string $moneda 978 para Euros, 840 para Dólares, 826 para libras esterlinas y 392 para Yenes.\n * @throws Exception\n *//**\n * Asignamos el número de pedido a nuestra compra (Los 4 primeros dígitos deben ser numéricos)\n *\n * @param string $pedido Numero de pedido alfanumérico\n * @throws Exception\n *//**\n * Campo opcional para el comercio para ser incluidos en los datos enviados por la respuesta "on-line" al comercio si se ha elegido esta opción.\n * @param string $datoscomercio Datos del comercio.\n *//**\n * Asigmanos la descripción del producto (Obligatorio)\n *\n * @param string $producto Descripción del producto\n * @throws Exception\n *//**\n * Asigmanos el nombre del usuario que realiza la compra (Obligatorio)\n *\n * @param string $titular Nombre del usuario (por ejemplo Juan Perez)\n * @throws Exception\n *//**\n * Asignamos el código FUC del comercio (Obligatorio)\n *\n * @param string $fuc Código fuc que nos envía sermepa\n * @throws Exception\n *//**\n * Asignar el tipo de terminal por defecto 1 en Sadabell (Obligatorio)\n *\n * @param int $terminal Número de terminal que le asignará su banco.\n * @throws Exception\n *//**\n * Asignar el tipo de transacción por defecto 0 que es autorización (Obligatorio)\n *\n * @param int $transactiontype tipo de transacción\n * @throws Exception\n *//**\n * Nombre del comercio que será reflejado en el ticket del comercio (Opcional)\n *\n * @param string $nombrecomercio Nombre del comercio\n *//**\n * Si el comercio tiene notificación "on-line". URL del comercio que recibirá un post con los datos de la transacción (Obligatorio).\n *\n * @param string $url_notificacion Url para guardar los datos recibidos por el comercio.\n * @throws Exception\n *//**\n * Si se envía será utilizado como URLOK ignorando el configurado en el módulo de administración en caso de tenerlo (Opcional).\n *\n * @param string $url Url donde mostrar un mensaje si se realizo correctamente el pago\n *//**\n * Si se envía será utilizado como URLKO ignorando el configurado en el módulo de administración en caso de tenerlo (Opcional).\n *\n * @param string $url Url donde mostrar un mensaje si se produjo un problema al realizar el\n *//**\n * Asignar la clave proporcionada por el banco (Obligatorio)\n *\n * @param string $clave Clave proporcionada por el Banco\n * @throws Exception\n *//**\n * Tipo de Pago\n *\n * @param string $metodo [T = Pago con Tarjeta, R = Pago por Transferencia, D = Domiciliacion] por defecto es T\n *//**\n * Firma que se envía a Sermepa (Obligatorio)\n *\n * @throws Exception\n *//**\n * Asignar el nombre del formulario\n *\n * @param string $nombre\n *//**\n * Generamos el Boto Submit\n *\n * @param string $nombre Nombre y ID del botón submit\n * @param string $texto Texto que se mostrara en el botón\n * @throws Exception\n *//**\n * Ejecutar la redirección automática al TPV\n *//**\n * Comprueba si la operación ha resultado satisfactoria\n *\n * @param array $postData Datos _$POST recibidos del TPV (url de notificación)\n * @return bool\n * @throws Exception\n *//**\n * Generamos el form a incluir en el HTML\n *\n * @return string\n *//**\n * Parseo a Float\n *\n * @param $ptString\n * @return bool|float\n */<_rslv>stringintint$codeidiomastringstring$btnsubmit.intval()stringstringstringstring.trim()stringstringstringstring<_doc>r11BCF9B2<_doc>rE7E94EB7<_doc>r2A5D1BD8<_doc>r7F428AAB<_doc>r603AB593<_doc>r3ACF6083<_doc>r0F9EC02D<_doc>rA6FE8ECC<_doc>r537DEF30<_doc>rCDB74445<_doc>r170F745C<_doc>r0A244B78<_doc>r2A6D8A0E<_doc>rA5276285<_doc>rCAF34783<_doc>r5F09796F<_doc>rE1892187<_doc>r9D7F72E7<_doc>r997410B7<_doc>rBF9BEDB4<_doc>r05CDF168<_doc>rA4A87208<_doc>r1F433C93<_doc>r06D61B17<_doc>rDE1854D1<_doc>r75828DA6<_doc>r74BF8E53<_doc>r32E44747<_doc>rB481A76D<_doc>r15565C4D<_doc>r9E10BB63<_doc>r8B209647<_doc>rE680CDB6<_doc>r2C9014C7<_doc>r1395285C<_doc>rD2B0DF16<_doc>rAE319CC3<_doc>r8D0BF2BE<_doc>r75960461<_doc>r1DA5A0E4<_doc>rF185728A<_doc>r7D921FF3<_doc>rED0AB41E<_doc>r171FB936<_doc>r3D8D5671<_doc>rDD66CC30<_doc>r128DAA62<_doc>r4C735FB1<_doc>rA7C93399<_doc>rEB98018D<_doc>r07BBF77F<_doc>r2F835ECF<_doc>r4B604393<_doc>r683615B7<_doc>r6D1F0EB9<_doc>rFABF0274<_doc>r6644103C<_doc>r9F755EBF<_doc>r74DADA96<_doc>r47F06A73<_doc>rC47AC87E<_doc>rF220656C<_doc>r1E7FA101<_doc>r6AD9D456<_doc>r23C34D2C<_doc>r6A5DAE73<_doc>r3CBB0B3D<_doc>r940FB88A<_doc>rC99859BB<_doc>r106D3F71<_doc>rD4C98DF4<_doc>r9515AC8D<_doc>r87932106<_doc>r89DA58CC<_doc>r0EC32858<_doc>rCE09A294<_doc>r55867850<_doc>r94C87090<_doc>r95C290B5<_doc>r2D3FEE60<_doc>r6A258F21<_doc>rDF151A3D<_doc>rEA79C11B<_doc>r7A0FFB98<_doc>rBBC0DF6A<_doc>rBE9ED358<_doc>r8A3C5D3A<_doc>r889EADC2<_doc>r3A786244<_doc>r38AA24D8<_doc>r6327430E<_doc>r75536FA2<_doc>rB3E5152F<_doc>r83349266<_doc>r70D0A674<_doc>r4F477AF5<_doc>r77745053<_doc>rCF27083B<_doc>r12CB664D<_doc>r1C913EF0phpmailerException$tport<_doc>r48E743C0<_doc>rDEA251E0<_doc>r4DA5DCDD<_doc>r2482FD06<_doc>r922C4B46<_doc>rDCA03187boolean.substr()integer$buf<_doc>r26821976<_doc>r8D77A5B2<_doc>r031F3EB6<_doc>r6BB0D1E4<_doc>r981E3952<_doc>r4DF2C9B5<_doc>r4DD4D553<_doc>r90F6E9F4<_doc>r461EC090<_doc>r58683373<_doc>rA0E98810<_doc>r9B3D60C3.basename()<_doc>rDB095044<_doc>r30DC7E62.md5()<_doc>r3F1FB784<_doc>r362EDBA3string<_doc>r3E5C9AC4<_doc>r9428D23E<_doc>r8B22D998<_doc>r30324373<_doc>rAC8C2192<_doc>r8C885D92<_doc>rE8782D68<_doc>r85D655CA<_doc>r8ED170F5<_doc>r81EC9C5C<_doc>rF713A115.basename()<_doc>r450768AF<_doc>rF4AC8B55<_doc>rA6AD3DBF<_doc>r4057CBB2<_doc>rBF7CC4D8<_doc>r034E36EB<_doc>rED081F35<_doc>r72408B5D<_doc>rBDCE3C0B<_doc>r3E40EE5D<_doc>rE1750050<_doc>r1845D968<_doc>rBA140612<_doc>r153E5327<_doc>rD3925C22<_doc>r216A45B6<_doc>rA5FF7B52<_doc>r42059452<_doc>r9E1248BC<_doc>r5DC4EAA3<_doc>r16FA76B6<_doc>rAC4D0E8D<_doc>r53958C12<_doc>r8664D97D<_doc>r5656615C<_doc>r08017253<_doc>r127475AD<_doc>r3A507379<_doc>r3CCA7D0E.file_get_contents()<_doc>r8A8FB700<_doc>rF2F260F0<_doc>r6AD6BA48$header$header<_doc>r73BAD876<_doc>rF802CC2F<_doc>rB5BA2AE6<_doc>r2FA47D32<_doc>rEE76A4CD<_doc>r5485FAF5<_doc>r121F1460<_doc>r7F5A57D5<_hsh>/**\n * PHPMailer - PHP email creation and transport class.\n * @package PHPMailer\n * @author Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>\n * @author Jim Jagielski (jimjag) <jimjag@gmail.com>\n * @author Andy Prevost (codeworxtech) <codeworxtech@users.sourceforge.net>\n * @author Brent R. Matzelle (original founder)\n *//**\n * The PHPMailer Version number.\n * @type string\n *//**\n * Email priority.\n * Options: 1 = High, 3 = Normal, 5 = low.\n * @type integer\n *//**\n * The character set of the message.\n * @type string\n *//**\n * The MIME Content-type of the message.\n * @type string\n *//**\n * The message encoding.\n * Options: "8bit", "7bit", "binary", "base64", and "quoted-printable".\n * @type string\n *//**\n * Holds the most recent mailer error message.\n * @type string\n *//**\n * The From email address for the message.\n * @type string\n *//**\n * The From name of the message.\n * @type string\n *//**\n * The Sender email (Return-Path) of the message.\n * If not empty, will be sent via -f to sendmail or as 'MAIL FROM' in smtp mode.\n * @type string\n *//**\n * The Return-Path of the message.\n * If empty, it will be set to either From or Sender.\n * @type string\n * @deprecated Email senders should never set a return-path header;\n * it's the receiver's job (RFC5321 section 4.4), so this no longer does anything.\n * @link https://tools.ietf.org/html/rfc5321#section-4.4 RFC5321 reference\n *//**\n * The Subject of the message.\n * @type string\n *//**\n * An HTML or plain text message body.\n * If HTML then call isHTML(true).\n * @type string\n *//**\n * The plain-text message body.\n * This body can be read by mail clients that do not have HTML email\n * capability such as mutt & Eudora.\n * Clients that can read HTML will view the normal Body.\n * @type string\n *//**\n * An iCal message part body.\n * Only supported in simple alt or alt_inline message types\n * To generate iCal events, use the bundled extras/EasyPeasyICS.php class or iCalcreator\n * @link http://sprain.ch/blog/downloads/php-class-easypeasyics-create-ical-files-with-php/\n * @link http://kigkonsult.se/iCalcreator/\n * @type string\n *//**\n * The complete compiled MIME message body.\n * @access protected\n * @type string\n *//**\n * The complete compiled MIME message headers.\n * @type string\n * @access protected\n *//**\n * Extra headers that createHeader() doesn't fold in.\n * @type string\n * @access protected\n *//**\n * Word-wrap the message body to this number of chars.\n * @type integer\n *//**\n * Which method to use to send mail.\n * Options: "mail", "sendmail", or "smtp".\n * @type string\n *//**\n * The path to the sendmail program.\n * @type string\n *//**\n * Whether mail() uses a fully sendmail-compatible MTA.\n * One which supports sendmail's "-oi -f" options.\n * @type boolean\n *//**\n * Path to PHPMailer plugins.\n * Useful if the SMTP class is not in the PHP include path.\n * @type string\n * @deprecated Should not be needed now there is an autoloader.\n *//**\n * The email address that a reading confirmation should be sent to.\n * @type string\n *//**\n * The hostname to use in Message-Id and Received headers\n * and as default HELO string.\n * If empty, the value returned\n * by SERVER_NAME is used or 'localhost.localdomain'.\n * @type string\n *//**\n * An ID to be used in the Message-Id header.\n * If empty, a unique id will be generated.\n * @type string\n *//**\n * The message Date to be used in the Date header.\n * If empty, the current date will be added.\n * @type string\n *//**\n * SMTP hosts.\n * Either a single hostname or multiple semicolon-delimited hostnames.\n * You can also specify a different port\n * for each host by using this format: [hostname:port]\n * (e.g. "smtp1.example.com:25;smtp2.example.com").\n * You can also specify encryption type, for example:\n * (e.g. "tls://smtp1.example.com:587;ssl://smtp2.example.com:465").\n * Hosts will be tried in order.\n * @type string\n *//**\n * The default SMTP server port.\n * @type integer\n * @TODO Why is this needed when the SMTP class takes care of it?\n *//**\n * The SMTP HELO of the message.\n * Default is $Hostname.\n * @type string\n * @see PHPMailer::$Hostname\n *//**\n * The secure connection prefix.\n * Options: "", "ssl" or "tls"\n * @type string\n *//**\n * Whether to use SMTP authentication.\n * Uses the Username and Password properties.\n * @type boolean\n * @see PHPMailer::$Username\n * @see PHPMailer::$Password\n *//**\n * SMTP username.\n * @type string\n *//**\n * SMTP password.\n * @type string\n *//**\n * SMTP auth type.\n * Options are LOGIN (default), PLAIN, NTLM, CRAM-MD5\n * @type string\n *//**\n * SMTP realm.\n * Used for NTLM auth\n * @type string\n *//**\n * SMTP workstation.\n * Used for NTLM auth\n * @type string\n *//**\n * The SMTP server timeout in seconds.\n * @type integer\n *//**\n * SMTP class debug output mode.\n * Debug output level.\n * Options:\n * * `0` No output\n * * `1` Commands\n * * `2` Data and commands\n * * `3` As 2 plus connection status\n * * `4` Low-level data output\n * @type integer\n * @see SMTP::$do_debug\n *//**\n * How to handle debug output.\n * Options:\n * * `echo` Output plain-text as-is, appropriate for CLI\n * * `html` Output escaped, line breaks converted to `<br>`, appropriate for browser output\n * * `error_log` Output to error log as configured in php.ini\n *\n * Alternatively, you can provide a callable expecting two params: a message string and the debug level:\n * <code>\n * $mail->Debugoutput = function($str, $level) {echo "debug level $level; message: $str";};\n * </code>\n * @type string|callable\n * @see SMTP::$Debugoutput\n *//**\n * Whether to keep SMTP connection open after each message.\n * If this is set to true then to close the connection\n * requires an explicit call to smtpClose().\n * @type boolean\n *//**\n * Whether to split multiple to addresses into multiple messages\n * or send them all in one message.\n * @type boolean\n *//**\n * Storage for addresses when SingleTo is enabled.\n * @type array\n * @TODO This should really not be public\n *//**\n * Whether to generate VERP addresses on send.\n * Only applicable when sending via SMTP.\n * @link http://en.wikipedia.org/wiki/Variable_envelope_return_path\n * @link http://www.postfix.org/VERP_README.html Postfix VERP info\n * @type boolean\n *//**\n * Whether to allow sending messages with an empty body.\n * @type boolean\n *//**\n * The default line ending.\n * @note The default remains "\n". We force CRLF where we know\n * it must be used via self::CRLF.\n * @type string\n *//**\n * DKIM selector.\n * @type string\n *//**\n * DKIM Identity.\n * Usually the email address used as the source of the email\n * @type string\n *//**\n * DKIM passphrase.\n * Used if your key is encrypted.\n * @type string\n *//**\n * DKIM signing domain name.\n * @example 'example.com'\n * @type string\n *//**\n * DKIM private key file path.\n * @type string\n *//**\n * Callback Action function name.\n *\n * The function that handles the result of the send email action.\n * It is called out by send() for each email sent.\n *\n * Value can be any php callable: http://www.php.net/is_callable\n *\n * Parameters:\n * boolean $result result of the send action\n * string $to email address of the recipient\n * string $cc cc email addresses\n * string $bcc bcc email addresses\n * string $subject the subject\n * string $body the email body\n * string $from email address of sender\n * @type string\n *//**\n * What to use in the X-Mailer header.\n * Options: null for default, whitespace for none, or a string to use\n * @type string\n *//**\n * An instance of the SMTP sender class.\n * @type SMTP\n * @access protected\n *//**\n * The array of 'to' addresses.\n * @type array\n * @access protected\n *//**\n * The array of 'cc' addresses.\n * @type array\n * @access protected\n *//**\n * The array of 'bcc' addresses.\n * @type array\n * @access protected\n *//**\n * The array of reply-to names and addresses.\n * @type array\n * @access protected\n *//**\n * An array of all kinds of addresses.\n * Includes all of $to, $cc, $bcc, $replyto\n * @type array\n * @access protected\n *//**\n * The array of attachments.\n * @type array\n * @access protected\n *//**\n * The array of custom headers.\n * @type array\n * @access protected\n *//**\n * The most recent Message-ID (including angular brackets).\n * @type string\n * @access protected\n *//**\n * The message's MIME type.\n * @type string\n * @access protected\n *//**\n * The array of MIME boundary strings.\n * @type array\n * @access protected\n *//**\n * The array of available languages.\n * @type array\n * @access protected\n *//**\n * The number of errors encountered.\n * @type integer\n * @access protected\n *//**\n * The S/MIME certificate file path.\n * @type string\n * @access protected\n *//**\n * The S/MIME key file path.\n * @type string\n * @access protected\n *//**\n * The S/MIME password for the key.\n * Used only if the key is encrypted.\n * @type string\n * @access protected\n *//**\n * Whether to throw exceptions for errors.\n * @type boolean\n * @access protected\n *//**\n * Error severity: message only, continue processing.\n *//**\n * Error severity: message, likely ok to continue processing.\n *//**\n * Error severity: message, plus full stop, critical error reached.\n *//**\n * SMTP RFC standard line ending.\n *//**\n * Constructor.\n * @param boolean $exceptions Should we throw external exceptions?\n *//**\n * Destructor.\n *//**\n * Call mail() in a safe_mode-aware fashion.\n * Also, unless sendmail_path points to sendmail (or something that\n * claims to be sendmail), don't pass params (not a perfect fix,\n * but it will do)\n * @param string $to To\n * @param string $subject Subject\n * @param string $body Message Body\n * @param string $header Additional Header(s)\n * @param string $params Params\n * @access private\n * @return boolean\n *//**\n * Output debugging info via user-defined method.\n * Only generates output if SMTP debug output is enabled (@see SMTP::$do_debug).\n * @see PHPMailer::$Debugoutput\n * @see PHPMailer::$SMTPDebug\n * @param string $str\n *//**\n * Sets message type to HTML or plain.\n * @param boolean $isHtml True for HTML mode.\n * @return void\n *//**\n * Send messages using SMTP.\n * @return void\n *//**\n * Send messages using PHP's mail() function.\n * @return void\n *//**\n * Send messages using $Sendmail.\n * @return void\n *//**\n * Send messages using qmail.\n * @return void\n *//**\n * Add a "To" address.\n * @param string $address\n * @param string $name\n * @return boolean true on success, false if address already used\n *//**\n * Add a "CC" address.\n * @note: This function works with the SMTP mailer on win32, not with the "mail" mailer.\n * @param string $address\n * @param string $name\n * @return boolean true on success, false if address already used\n *//**\n * Add a "BCC" address.\n * @note: This function works with the SMTP mailer on win32, not with the "mail" mailer.\n * @param string $address\n * @param string $name\n * @return boolean true on success, false if address already used\n *//**\n * Add a "Reply-to" address.\n * @param string $address\n * @param string $name\n * @return boolean\n *//**\n * Add an address to one of the recipient arrays.\n * Addresses that have been added already return false, but do not throw exceptions\n * @param string $kind One of 'to', 'cc', 'bcc', 'ReplyTo'\n * @param string $address The email address to send to\n * @param string $name\n * @throws phpmailerException\n * @return boolean true on success, false if address already used or invalid in some way\n * @access protected\n *//**\n * Set the From and FromName properties.\n * @param string $address\n * @param string $name\n * @param boolean $auto Whether to also set the Sender address, defaults to true\n * @throws phpmailerException\n * @return boolean\n *//**\n * Return the Message-ID header of the last email.\n * Technically this is the value from the last time the headers were created,\n * but it's also the message ID of the last sent message except in\n * pathological cases.\n * @return string\n *//**\n * Check that a string looks like an email address.\n * @param string $address The email address to check\n * @param string $patternselect A selector for the validation pattern to use :\n * * `auto` Pick strictest one automatically;\n * * `pcre8` Use the squiloople.com pattern, requires PCRE > 8.0, PHP >= 5.3.2, 5.2.14;\n * * `pcre` Use old PCRE implementation;\n * * `php` Use PHP built-in FILTER_VALIDATE_EMAIL; same as pcre8 but does not allow 'dotless' domains;\n * * `html5` Use the pattern given by the HTML5 spec for 'email' type form input elements.\n * * `noregex` Don't use a regex: super fast, really dumb.\n * @return boolean\n * @static\n * @access public\n *//**\n * Uses the same RFC5322 regex on which FILTER_VALIDATE_EMAIL is based, but allows dotless domains.\n * @link http://squiloople.com/2009/12/20/email-address-validation/\n * @copyright 2009-2010 Michael Rushton\n * Feel free to use and redistribute this code. But please keep this copyright notice.\n *//**\n * This is the pattern used in the HTML5 spec for validation of 'email' type form input elements.\n * @link http://www.whatwg.org/specs/web-apps/current-work/#e-mail-state-(type=email)\n *//**\n * Create a message and send it.\n * Uses the sending method specified by $Mailer.\n * @throws phpmailerException\n * @return boolean false on error - See the ErrorInfo property for details of the error.\n *//**\n * Prepare a message for sending.\n * @throws phpmailerException\n * @return boolean\n *//**\n * Actually send a message.\n * Send the email via the selected mechanism\n * @throws phpmailerException\n * @return boolean\n *//**\n * Send mail using the $Sendmail program.\n * @param string $header The message headers\n * @param string $body The message body\n * @see PHPMailer::$Sendmail\n * @throws phpmailerException\n * @access protected\n * @return boolean\n *//**\n * Send mail using the PHP mail() function.\n * @param string $header The message headers\n * @param string $body The message body\n * @link http://www.php.net/manual/en/book.mail.php\n * @throws phpmailerException\n * @access protected\n * @return boolean\n *//**\n * Get an instance to use for SMTP operations.\n * Override this function to load your own SMTP implementation\n * @return SMTP\n *//**\n * Send mail via SMTP.\n * Returns false if there is a bad MAIL FROM, RCPT, or DATA input.\n * Uses the PHPMailerSMTP class by default.\n * @see PHPMailer::getSMTPInstance() to use a different class.\n * @param string $header The message headers\n * @param string $body The message body\n * @throws phpmailerException\n * @uses SMTP\n * @access protected\n * @return boolean\n *//**\n * Initiate a connection to an SMTP server.\n * Returns false if the operation failed.\n * @param array $options An array of options compatible with stream_context_create()\n * @uses SMTP\n * @access public\n * @throws phpmailerException\n * @return boolean\n *//**\n * Close the active SMTP session if one exists.\n * @return void\n *//**\n * Set the language for error messages.\n * Returns false if it cannot load the language file.\n * The default language is English.\n * @param string $langcode ISO 639-1 2-character language code (e.g. French is "fr")\n * @param string $lang_path Path to the language file directory, with trailing separator (slash)\n * @return boolean\n * @access public\n *//**\n * Get the array of strings for the current language.\n * @return array\n *//**\n * Create recipient headers.\n * @access public\n * @param string $type\n * @param array $addr An array of recipient,\n * where each recipient is a 2-element indexed array with element 0 containing an address\n * and element 1 containing a name, like:\n * array(array('joe@example.com', 'Joe User'), array('zoe@example.com', 'Zoe User'))\n * @return string\n *//**\n * Format an address for use in a message header.\n * @access public\n * @param array $addr A 2-element indexed array, element 0 containing an address, element 1 containing a name\n * like array('joe@example.com', 'Joe User')\n * @return string\n *//**\n * Word-wrap message.\n * For use with mailers that do not automatically perform wrapping\n * and for quoted-printable encoded messages.\n * Original written by philippe.\n * @param string $message The message to wrap\n * @param integer $length The line length to wrap to\n * @param boolean $qp_mode Whether to run in Quoted-Printable mode\n * @access public\n * @return string\n *//**\n * Find the last character boundary prior to $maxLength in a utf-8\n * quoted (printable) encoded string.\n * Original written by Colin Brown.\n * @access public\n * @param string $encodedText utf-8 QP text\n * @param integer $maxLength find last character boundary prior to this length\n * @return integer\n *//**\n * Set the body wrapping.\n * @access public\n * @return void\n *//**\n * Assemble message headers.\n * @access public\n * @return string The assembled headers\n *//**\n * Get the message MIME type headers.\n * @access public\n * @return string\n *//**\n * Returns the whole MIME message.\n * Includes complete headers and body.\n * Only valid post preSend().\n * @see PHPMailer::preSend()\n * @access public\n * @return string\n *//**\n * Assemble the message body.\n * Returns an empty string on failure.\n * @access public\n * @throws phpmailerException\n * @return string The assembled message body\n *//**\n * Return the start of a message boundary.\n * @access protected\n * @param string $boundary\n * @param string $charSet\n * @param string $contentType\n * @param string $encoding\n * @return string\n *//**\n * Return the end of a message boundary.\n * @access protected\n * @param string $boundary\n * @return string\n *//**\n * Set the message type.\n * PHPMailer only supports some preset message types,\n * not arbitrary MIME structures.\n * @access protected\n * @return void\n *//**\n * Format a header line.\n * @access public\n * @param string $name\n * @param string $value\n * @return string\n *//**\n * Return a formatted mail line.\n * @access public\n * @param string $value\n * @return string\n *//**\n * Add an attachment from a path on the filesystem.\n * Returns false if the file could not be found or read.\n * @param string $path Path to the attachment.\n * @param string $name Overrides the attachment name.\n * @param string $encoding File encoding (see $Encoding).\n * @param string $type File extension (MIME) type.\n * @param string $disposition Disposition to use\n * @throws phpmailerException\n * @return boolean\n *//**\n * Return the array of attachments.\n * @return array\n *//**\n * Attach all file, string, and binary attachments to the message.\n * Returns an empty string on failure.\n * @access protected\n * @param string $disposition_type\n * @param string $boundary\n * @return string\n *//**\n * Encode a file attachment in requested format.\n * Returns an empty string on failure.\n * @param string $path The full path to the file\n * @param string $encoding The encoding to use; one of 'base64', '7bit', '8bit', 'binary', 'quoted-printable'\n * @throws phpmailerException\n * @see EncodeFile(encodeFile\n * @access protected\n * @return string\n *//**\n * Encode a string in requested format.\n * Returns an empty string on failure.\n * @param string $str The text to encode\n * @param string $encoding The encoding to use; one of 'base64', '7bit', '8bit', 'binary', 'quoted-printable'\n * @access public\n * @return string\n *//**\n * Encode a header string optimally.\n * Picks shortest of Q, B, quoted-printable or none.\n * @access public\n * @param string $str\n * @param string $position\n * @return string\n *//** @noinspection PhpMissingBreakStatementInspection *//**\n * Check if a string contains multi-byte characters.\n * @access public\n * @param string $str multi-byte text to wrap encode\n * @return boolean\n *//**\n * Does a string contain any 8-bit chars (in any charset)?\n * @param string $text\n * @return boolean\n *//**\n * Encode and wrap long multibyte strings for mail headers\n * without breaking lines within a character.\n * Adapted from a function by paravoid\n * @link http://www.php.net/manual/en/function.mb-encode-mimeheader.php#60283\n * @access public\n * @param string $str multi-byte text to wrap encode\n * @param string $linebreak string to use as linefeed/end-of-line\n * @return string\n *//**\n * Encode a string in quoted-printable format.\n * According to RFC2045 section 6.7.\n * @access public\n * @param string $string The text to encode\n * @param integer $line_max Number of chars allowed on a line before wrapping\n * @return string\n * @link http://www.php.net/manual/en/function.quoted-printable-decode.php#89417 Adapted from this comment\n *//**\n * Backward compatibility wrapper for an old QP encoding function that was removed.\n * @see PHPMailer::encodeQP()\n * @access public\n * @param string $string\n * @param integer $line_max\n * @param boolean $space_conv\n * @return string\n * @deprecated Use encodeQP instead.\n *//** @noinspection PhpUnusedParameterInspection *//**\n * Encode a string using Q encoding.\n * @link http://tools.ietf.org/html/rfc2047\n * @param string $str the text to encode\n * @param string $position Where the text is going to be used, see the RFC for what that means\n * @access public\n * @return string\n *//**\n * Add a string or binary attachment (non-filesystem).\n * This method can be used to attach ascii or binary data,\n * such as a BLOB record from a database.\n * @param string $string String attachment data.\n * @param string $filename Name of the attachment.\n * @param string $encoding File encoding (see $Encoding).\n * @param string $type File extension (MIME) type.\n * @param string $disposition Disposition to use\n * @return void\n *//**\n * Add an embedded (inline) attachment from a file.\n * This can include images, sounds, and just about any other document type.\n * These differ from 'regular' attachmants in that they are intended to be\n * displayed inline with the message, not just attached for download.\n * This is used in HTML messages that embed the images\n * the HTML refers to using the $cid value.\n * @param string $path Path to the attachment.\n * @param string $cid Content ID of the attachment; Use this to reference\n * the content when using an embedded image in HTML.\n * @param string $name Overrides the attachment name.\n * @param string $encoding File encoding (see $Encoding).\n * @param string $type File MIME type.\n * @param string $disposition Disposition to use\n * @return boolean True on successfully adding an attachment\n *//**\n * Add an embedded stringified attachment.\n * This can include images, sounds, and just about any other document type.\n * Be sure to set the $type to an image type for images:\n * JPEG images use 'image/jpeg', GIF uses 'image/gif', PNG uses 'image/png'.\n * @param string $string The attachment binary data.\n * @param string $cid Content ID of the attachment; Use this to reference\n * the content when using an embedded image in HTML.\n * @param string $name\n * @param string $encoding File encoding (see $Encoding).\n * @param string $type MIME type.\n * @param string $disposition Disposition to use\n * @return boolean True on successfully adding an attachment\n *//**\n * Check if an inline attachment is present.\n * @access public\n * @return boolean\n *//**\n * Check if an attachment (non-inline) is present.\n * @return boolean\n *//**\n * Check if this message has an alternative body set.\n * @return boolean\n *//**\n * Clear all To recipients.\n * @return void\n *//**\n * Clear all CC recipients.\n * @return void\n *//**\n * Clear all BCC recipients.\n * @return void\n *//**\n * Clear all ReplyTo recipients.\n * @return void\n *//**\n * Clear all recipient types.\n * @return void\n *//**\n * Clear all filesystem, string, and binary attachments.\n * @return void\n *//**\n * Clear all custom headers.\n * @return void\n *//**\n * Add an error message to the error container.\n * @access protected\n * @param string $msg\n * @return void\n *//**\n * Return an RFC 822 formatted date.\n * @access public\n * @return string\n * @static\n *//**\n * Get the server hostname.\n * Returns 'localhost.localdomain' if unknown.\n * @access protected\n * @return string\n *//**\n * Get an error message in the current language.\n * @access protected\n * @param string $key\n * @return string\n *//**\n * Check if an error occurred.\n * @access public\n * @return boolean True if an error did occur.\n *//**\n * Ensure consistent line endings in a string.\n * Changes every end of line from CRLF, CR or LF to $this->LE.\n * @access public\n * @param string $str String to fixEOL\n * @return string\n *//**\n * Add a custom header.\n * $name value can be overloaded to contain\n * both header name and value (name:value)\n * @access public\n * @param string $name Custom header name\n * @param string $value Header value\n * @return void\n *//**\n * Create a message from an HTML string.\n * Automatically makes modifications for inline images and backgrounds\n * and creates a plain-text version by converting the HTML.\n * Overwrites any existing values in $this->Body and $this->AltBody\n * @access public\n * @param string $message HTML message string\n * @param string $basedir baseline directory for path\n * @param boolean $advanced Whether to use the advanced HTML to text converter\n * @return string $message\n *//**\n * Convert an HTML string into plain text.\n * @param string $html The HTML text to convert\n * @param boolean $advanced Should this use the more complex html2text converter or just a simple one?\n * @return string\n *//**\n * Get the MIME type for a file extension.\n * @param string $ext File extension\n * @access public\n * @return string MIME type of file.\n * @static\n *//**\n * Map a file name to a MIME type.\n * Defaults to 'application/octet-stream', i.e.. arbitrary binary data.\n * @param string $filename A file name or full path, does not need to exist as a file\n * @return string\n * @static\n *//**\n * Multi-byte-safe pathinfo replacement.\n * Drop-in replacement for pathinfo(), but multibyte-safe, cross-platform-safe, old-version-safe.\n * Works similarly to the one in PHP >= 5.2.0\n * @link http://www.php.net/manual/en/function.pathinfo.php#107461\n * @param string $path A filename or path, does not need to exist as a file\n * @param integer|string $options Either a PATHINFO_* constant,\n * or a string name to return only the specified piece, allows 'filename' to work on PHP < 5.2\n * @return string|array\n * @static\n *//**\n * Set or reset instance properties.\n *\n * Usage Example:\n * $page->set('X-Priority', '3');\n *\n * @access public\n * @param string $name\n * @param mixed $value\n * NOTE: will not work with arrays, there are no arrays to set/reset\n * @throws phpmailerException\n * @return boolean\n * @TODO Should this not be using __set() magic function?\n *//**\n * Strip newlines to prevent header injection.\n * @access public\n * @param string $str\n * @return string\n *//**\n * Normalize line breaks in a string.\n * Converts UNIX LF, Mac CR and Windows CRLF line breaks into a single line break format.\n * Defaults to CRLF (for message bodies) and preserves consecutive breaks.\n * @param string $text\n * @param string $breaktype What kind of line break to use, defaults to CRLF\n * @return string\n * @access public\n * @static\n *//**\n * Set the public and private key files and password for S/MIME signing.\n * @access public\n * @param string $cert_filename\n * @param string $key_filename\n * @param string $key_pass Password for private key\n *//**\n * Quoted-Printable-encode a DKIM header.\n * @access public\n * @param string $txt\n * @return string\n *//**\n * Generate a DKIM signature.\n * @access public\n * @param string $signHeader\n * @throws phpmailerException\n * @return string\n *//**\n * Generate a DKIM canonicalization header.\n * @access public\n * @param string $signHeader Header\n * @return string\n *//**\n * Generate a DKIM canonicalization body.\n * @access public\n * @param string $body Message Body\n * @return string\n *//**\n * Create the DKIM header and body in a new message header.\n * @access public\n * @param string $headers_line Header lines\n * @param string $subject Subject\n * @param string $body Body\n * @return string\n *//**\n * Allows for public read access to 'to' property.\n * @access public\n * @return array\n *//**\n * Allows for public read access to 'cc' property.\n * @access public\n * @return array\n *//**\n * Allows for public read access to 'bcc' property.\n * @access public\n * @return array\n *//**\n * Allows for public read access to 'ReplyTo' property.\n * @access public\n * @return array\n *//**\n * Allows for public read access to 'all_recipients' property.\n * @access public\n * @return array\n *//**\n * Perform a callback.\n * @param boolean $isSent\n * @param array $to\n * @param array $cc\n * @param array $bcc\n * @param string $subject\n * @param string $body\n * @param string $from\n *//**\n * PHPMailer exception handler\n * @package PHPMailer\n *//**\n * Prettify error message output\n * @return string\n */<_rslv>.ini_get().trim().trim().trim()SMTPstring$PHPMAILER_LANGstringstringstringmixed<_lns>3<_doc>r75F147E4<_doc>r6C02F431<_doc>r95110D96<_doc>r72E23B36<_doc>rE89A7B05<_doc>r32456016<_doc>r4DCAA072<_doc>r9BE4EAC7<_doc>r8BC84A86<_doc>rA422FBD7<_doc>r81F73756<_doc>rB524EE0D<_doc>r9C01F490<_doc>r29CDD1D2<_doc>r315FBE3B<_doc>rF3A2196D<_doc>rBBFFD29E<_doc>rA23275DB<_doc>r689088C2<_doc>rDDCBD228<_doc>r9166856F<_doc>rFF2F1A3A<_doc>r17906C3D<_doc>r13FFC3B9<_doc>r38924377<_hsh>/**\n * PHPMailer POP-Before-SMTP Authentication Class.\n * Specifically for PHPMailer to use for RFC1939 POP-before-SMTP authentication.\n * Does not support APOP.\n * @package PHPMailer\n * @author Richard Davey (original author) <rich@corephp.co.uk>\n * @author Marcus Bointon (Synchro/coolbru) <phpmailer@synchromedia.co.uk>\n * @author Jim Jagielski (jimjag) <jimjag@gmail.com>\n * @author Andy Prevost (codeworxtech) <codeworxtech@users.sourceforge.net>\n *//**\n * The POP3 PHPMailer Version number.\n * @type string\n * @access public\n *//**\n * Default POP3 port number.\n * @type integer\n * @access public\n *//**\n * Default timeout in seconds.\n * @type integer\n * @access public\n *//**\n * POP3 Carriage Return + Line Feed.\n * @type string\n * @access public\n * @deprecated Use the constant instead\n *//**\n * Debug display level.\n * Options: 0 = no, 1+ = yes\n * @type integer\n * @access public\n *//**\n * POP3 mail server hostname.\n * @type string\n * @access public\n *//**\n * POP3 port number.\n * @type integer\n * @access public\n *//**\n * POP3 Timeout Value in seconds.\n * @type integer\n * @access public\n *//**\n * POP3 username\n * @type string\n * @access public\n *//**\n * POP3 password.\n * @type string\n * @access public\n *//**\n * Resource handle for the POP3 connection socket.\n * @type resource\n * @access private\n *//**\n * Are we connected?\n * @type boolean\n * @access private\n *//**\n * Error container.\n * @type array\n * @access private\n *//**\n * Line break constant\n *//**\n * Simple static wrapper for all-in-one POP before SMTP\n * @param $host\n * @param boolean $port\n * @param boolean $tval\n * @param string $username\n * @param string $password\n * @param integer $debug_level\n * @return boolean\n *//**\n * Authenticate with a POP3 server.\n * A connect, login, disconnect sequence\n * appropriate for POP-before SMTP authorisation.\n * @access public\n * @param string $host The hostname to connect to\n * @param integer|boolean $port The port number to connect to\n * @param integer|boolean $timeout The timeout value\n * @param string $username\n * @param string $password\n * @param integer $debug_level\n * @return boolean\n *//**\n * Connect to a POP3 server.\n * @access public\n * @param string $host\n * @param integer|boolean $port\n * @param integer $tval\n * @return boolean\n *//**\n * Log in to the POP3 server.\n * Does not support APOP (RFC 2828, 4949).\n * @access public\n * @param string $username\n * @param string $password\n * @return boolean\n *//**\n * Disconnect from the POP3 server.\n * @access public\n *//**\n * Get a response from the POP3 server.\n * $size is the maximum number of bytes to retrieve\n * @param integer $size\n * @return string\n * @access private\n *//**\n * Send raw data to the POP3 server.\n * @param string $string\n * @return integer\n * @access private\n *//**\n * Checks the POP3 server response.\n * Looks for for +OK or -ERR.\n * @param string $string\n * @return boolean\n * @access private\n *//**\n * Add an error to the internal error store.\n * Also display debug output if it's enabled.\n * @param $error\n *//**\n * POP3 connection error handler.\n * @param integer $errno\n * @param string $errstr\n * @param string $errfile\n * @param integer $errline\n * @access private\n */<_rslv>stringintegerstringstring$error<_doc>r39FCA7C8<_doc>rE906CF5B<_doc>r97242324<_doc>rA53FB4E6<_doc>rDA665435<_doc>r026E2510<_doc>r65F23B64<_doc>r4BEF575F<_doc>r97AC55DD<_doc>r3312635C<_doc>r27E34D4B<_doc>rBAC14948<_doc>rAAF10F93<_doc>rDAF0BE3B<_doc>r5A575A61<_doc>r55CB5389<_doc>r0651FDD2<_doc>r4CE3C66B<_doc>r581961D0<_doc>rAD9109F7<_doc>rE7E9FE36<_doc>r6376EB67<_doc>rDDB61CA7<_doc>rD1C53820<_doc>rC0FEF10E.substr()<_doc>rF51CAFCF<_doc>r4206F504<_doc>r14CCFCD8<_doc>r7AC53ABE<_doc>r1829D329<_doc>r8474B700<_doc>rB8F93E16<_doc>r8A40E1C2<_doc>r1415FE12<_doc>r86A70311<_doc>r549C40E2<_doc>rCFBA85CA<_doc>rB5D3FFAD<_doc>r6EA6A214<_doc>r8F91F086<_doc>r1B04DE19<_doc>r2FEDEF05<_doc>r856B27E0<_doc>r00DCCF62<_doc>rE0365487<_doc>rFF21D894<_doc>r498B63C4<_doc>r8D71992F<_hsh>/**\n * PHPMailer RFC821 SMTP email transport class.\n * Implements RFC 821 SMTP commands and provides some utility methods for sending mail to an SMTP server.\n * @package PHPMailer\n * @author Chris Ryan <unknown@example.com>\n * @author Marcus Bointon <phpmailer@synchromedia.co.uk>\n *//**\n * The PHPMailer SMTP version number.\n * @type string\n *//**\n * SMTP line break constant.\n * @type string\n *//**\n * The SMTP port to use if one is not specified.\n * @type integer\n *//**\n * The maximum line length allowed by RFC 2822 section 2.1.1\n * @type integer\n *//**\n * The PHPMailer SMTP Version number.\n * @type string\n * @deprecated Use the `VERSION` constant instead\n * @see SMTP::VERSION\n *//**\n * SMTP server port number.\n * @type integer\n * @deprecated This is only ever used as a default value, so use the `DEFAULT_SMTP_PORT` constant instead\n * @see SMTP::DEFAULT_SMTP_PORT\n *//**\n * SMTP reply line ending.\n * @type string\n * @deprecated Use the `CRLF` constant instead\n * @see SMTP::CRLF\n *//**\n * Debug output level.\n * Options:\n * * `0` No output\n * * `1` Commands\n * * `2` Data and commands\n * * `3` As 2 plus connection status\n * * `4` Low-level data output\n * @type integer\n *//**\n * How to handle debug output.\n * Options:\n * * `echo` Output plain-text as-is, appropriate for CLI\n * * `html` Output escaped, line breaks converted to `<br>`, appropriate for browser output\n * * `error_log` Output to error log as configured in php.ini\n *\n * Alternatively, you can provide a callable expecting two params: a message string and the debug level:\n * <code>\n * $smtp->Debugoutput = function($str, $level) {echo "debug level $level; message: $str";};\n * </code>\n * @type string|callable\n *//**\n * Whether to use VERP.\n * @link http://en.wikipedia.org/wiki/Variable_envelope_return_path\n * @link http://www.postfix.org/VERP_README.html Info on VERP\n * @type boolean\n *//**\n * The timeout value for connection, in seconds.\n * Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2\n * This needs to be quite high to function correctly with hosts using greetdelay as an anti-spam measure.\n * @link http://tools.ietf.org/html/rfc2821#section-4.5.3.2\n * @type integer\n *//**\n * The SMTP timelimit value for reads, in seconds.\n * @type integer\n *//**\n * The socket for the server connection.\n * @type resource\n *//**\n * Error message, if any, for the last call.\n * @type array\n *//**\n * The reply the server sent to us for HELO.\n * If null, no HELO string has yet been received.\n * @type string|null\n *//**\n * The most recent reply received from the server.\n * @type string\n *//**\n * Output debugging info via a user-selected method.\n * @see SMTP::$Debugoutput\n * @see SMTP::$do_debug\n * @param string $str Debug string to output\n * @return void\n *//**\n * Connect to an SMTP server.\n * @param string $host SMTP server IP or host name\n * @param integer $port The port number to connect to\n * @param integer $timeout How long to wait for the connection to open\n * @param array $options An array of options for stream_context_create()\n * @access public\n * @return boolean\n *//**\n * Initiate a TLS (encrypted) session.\n * @access public\n * @return boolean\n *//**\n * Perform SMTP authentication.\n * Must be run after hello().\n * @see hello()\n * @param string $username The user name\n * @param string $password The password\n * @param string $authtype The auth type (PLAIN, LOGIN, NTLM, CRAM-MD5)\n * @param string $realm The auth realm for NTLM\n * @param string $workstation The auth workstation for NTLM\n * @access public\n * @return boolean True if successfully authenticated.\n *//**\n * Calculate an MD5 HMAC hash.\n * Works like hash_hmac('md5', $data, $key)\n * in case that function is not available\n * @param string $data The data to hash\n * @param string $key The key to hash with\n * @access protected\n * @return string\n *//**\n * Check connection state.\n * @access public\n * @return boolean True if connected.\n *//**\n * Close the socket and clean up the state of the class.\n * Don't use this function without first trying to use QUIT.\n * @see quit()\n * @access public\n * @return void\n *//**\n * Send an SMTP DATA command.\n * Issues a data command and sends the msg_data to the server,\n * finializing the mail transaction. $msg_data is the message\n * that is to be send with the headers. Each header needs to be\n * on a single line followed by a <CRLF> with the message headers\n * and the message body being separated by and additional <CRLF>.\n * Implements rfc 821: DATA <CRLF>\n * @param string $msg_data Message data to send\n * @access public\n * @return boolean\n *//**\n * Send an SMTP HELO or EHLO command.\n * Used to identify the sending server to the receiving server.\n * This makes sure that client and server are in a known state.\n * Implements RFC 821: HELO <SP> <domain> <CRLF>\n * and RFC 2821 EHLO.\n * @param string $host The host name or IP to connect to\n * @access public\n * @return boolean\n *//**\n * Send an SMTP HELO or EHLO command.\n * Low-level implementation used by hello()\n * @see hello()\n * @param string $hello The HELO string\n * @param string $host The hostname to say we are\n * @access protected\n * @return boolean\n *//**\n * Send an SMTP MAIL command.\n * Starts a mail transaction from the email address specified in\n * $from. Returns true if successful or false otherwise. If True\n * the mail transaction is started and then one or more recipient\n * commands may be called followed by a data command.\n * Implements rfc 821: MAIL <SP> FROM:<reverse-path> <CRLF>\n * @param string $from Source address of this message\n * @access public\n * @return boolean\n *//**\n * Send an SMTP QUIT command.\n * Closes the socket if there is no error or the $close_on_error argument is true.\n * Implements from rfc 821: QUIT <CRLF>\n * @param boolean $close_on_error Should the connection close if an error occurs?\n * @access public\n * @return boolean\n *//**\n * Send an SMTP RCPT command.\n * Sets the TO argument to $toaddr.\n * Returns true if the recipient was accepted false if it was rejected.\n * Implements from rfc 821: RCPT <SP> TO:<forward-path> <CRLF>\n * @param string $toaddr The address the message is being sent to\n * @access public\n * @return boolean\n *//**\n * Send an SMTP RSET command.\n * Abort any transaction that is currently in progress.\n * Implements rfc 821: RSET <CRLF>\n * @access public\n * @return boolean True on success.\n *//**\n * Send a command to an SMTP server and check its return code.\n * @param string $command The command name - not sent to the server\n * @param string $commandstring The actual command to send\n * @param integer|array $expect One or more expected integer success codes\n * @access protected\n * @return boolean True on success.\n *//**\n * Send an SMTP SAML command.\n * Starts a mail transaction from the email address specified in $from.\n * Returns true if successful or false otherwise. If True\n * the mail transaction is started and then one or more recipient\n * commands may be called followed by a data command. This command\n * will send the message to the users terminal if they are logged\n * in and send them an email.\n * Implements rfc 821: SAML <SP> FROM:<reverse-path> <CRLF>\n * @param string $from The address the message is from\n * @access public\n * @return boolean\n *//**\n * Send an SMTP VRFY command.\n * @param string $name The name to verify\n * @access public\n * @return boolean\n *//**\n * Send an SMTP NOOP command.\n * Used to keep keep-alives alive, doesn't actually do anything\n * @access public\n * @return boolean\n *//**\n * Send an SMTP TURN command.\n * This is an optional command for SMTP that this class does not support.\n * This method is here to make the RFC821 Definition complete for this class\n * and _may_ be implemented in future\n * Implements from rfc 821: TURN <CRLF>\n * @access public\n * @return boolean\n *//**\n * Send raw data to the server.\n * @param string $data The data to send\n * @access public\n * @return integer|boolean The number of bytes sent to the server or false on error\n *//**\n * Get the latest error.\n * @access public\n * @return array\n *//**\n * Get the last reply from the server.\n * @access public\n * @return string\n *//**\n * Read the SMTP server's response.\n * Either before eof or socket timeout occurs on the operation.\n * With SMTP we can tell if we have more lines to read if the\n * 4th character is '-' symbol. If it is a space then we don't\n * need to read anything else.\n * @access protected\n * @return string\n *//**\n * Enable or disable VERP address generation.\n * @param boolean $enabled\n *//**\n * Get VERP address generation mode.\n * @return boolean\n *//**\n * Set debug output method.\n * @param string $method The function/method to use for debugging output.\n *//**\n * Get debug output method.\n * @return string\n *//**\n * Set debug output level.\n * @param integer $level\n *//**\n * Get debug output level.\n * @return integer\n *//**\n * Set SMTP timeout.\n * @param integer $timeout\n *//**\n * Get SMTP timeout.\n * @return integer\n */<_rslv>stringintegerSMTP.errorSMTP.get_lines()booleaninteger<_lns>1<_doc>rFAFE783C<_hsh>/**\n * PHPMailer SPL autoloader.\n * @param string $classname The name of the class to load\n */<_rslv><_lns>1<_doc>r3F863BDD<_hsh>/**\n* NOTA SOBRE LA LICENCIA DE USO DEL SOFTWARE\n* \n* El uso de este software está sujeto a las Condiciones de uso de software que\n* se incluyen en el paquete en el documento "Aviso Legal.pdf". También puede\n* obtener una copia en la siguiente url:\n* http://www.redsys.es/wps/portal/redsys/publica/areadeserviciosweb/descargaDeDocumentacionYEjecutables\n* \n* Redsys es titular de todos los derechos de propiedad intelectual e industrial\n* del software.\n* \n* Quedan expresamente prohibidas la reproducción, la distribución y la\n* comunicación pública, incluida su modalidad de puesta a disposición con fines\n* distintos a los descritos en las Condiciones de uso.\n* \n* Redsys se reserva la posibilidad de ejercer las acciones legales que le\n* correspondan para hacer valer sus derechos frente a cualquier infracción de\n* los derechos de propiedad intelectual y/o industrial.\n* \n* Redsys Servicios de Procesamiento, S.L., CIF B85955367\n*/<_rslv>$value<_lns>1<_rslv><_rslv>$nmaxarticu<_lns>1Ttienda<_rslv><_lns>1<_rslv>Ttienda<_lns>1<_rslv><_lns>1<_rslv><_rslv><_lns>1<_rslv><_doc>rAB73A33B<_doc>rF4FAA055<_lns>2<_rslv>$o<_hsh>/**\n * @desc Clase para imprimir pedidos en pdf\n *//**\n * @desc Borrar los ficheros temporales\n */$left.array_search()$b2$i$i$l$i$i.gzcompress()<_rslv>FPDF._loadfont()FPDF.$mtd()$h.strtolower().str_replace()FPDF.FontSizePtFPDF.DrawColorFPDF.FillColorFPDF.TextColorFPDF.ColorFlagFPDF.wsFPDF._getpagesize()FPDF._getpagesize().strtoupper()FPDF.LineWidth$left$top$rightFPDF.x$auto$margin$zoom$layout$compressFPDF._UTF8toUTF16()FPDF._UTF8toUTF16()FPDF._UTF8toUTF16()FPDF._UTF8toUTF16()FPDF._UTF8toUTF16()$alias$y<_lns>1$left$iFPDF.FontFamily$b2$i$i.str_replace()$l$i$i.str_replace()$dest<_rslv>$d$diffFPDF.$mtd()$hFPDF.FontFamily.str_replace()FPDF.FontSizePtFPDF.DrawColorFPDF.FillColorFPDF.TextColorFPDF.ColorFlagFPDF.ws.strtoupper()FPDF.LineWidth$left$top$rightFPDF.x$auto$margin$zoom$layout$compress$title$subject$author$keywords$creator$alias$y<_lns>2$left$b2$i$i$l$i$i$name$tmp$dest.gzcompress()<_rslv>$rotationFPDF._loadfont()FPDF.$mtd()$h.strtolower().str_replace()FPDF.FontSizePtFPDF.DrawColorFPDF.FillColorFPDF.TextColorFPDF.ColorFlagFPDF.wsFPDF._getpagesize()FPDF._getpagesize().strtoupper()$rotationFPDF.LineWidth$left$top$rightFPDF.x$auto$margin$zoom$layout$compress$isUTF8$alias$y<_lns>1<_lns>1$k<_rslv>$dominio$Port$Username$Password$dominio$privatekeyfile$dominio$Username$Username$asunto$cuerpo<_lns>1<_rslv><_rslv><_lns>1<_rslv><_lns>1<_rslv><_lns>1<_rslv>$nIndex$cFam$i$i<_lns>1<_rslv>$w$a<_lns>1<_rslv><_lns>1<_rslv><_lns>1<_rslv><_lns>1<_rslv>TKit<_doc>r52714B16<_doc>rA868D316<_doc>r9D4B7777<_doc>rFD870EC6<_doc>r3FDB7B22<_doc>r6B884BBC<_doc>r9955D0B1<_doc>rFC129EFC<_doc>r3B86E02E<_doc>r344C0888<_doc>r0BBC152C<_doc>r2054BF59<_doc>r1301A951<_doc>rC64D5FD6<_doc>rC34055BD<_doc>r507DEB99<_doc>r4B97EF93<_doc>r5EFAE340<_doc>rE7C70E32<_doc>r23EED9D1<_doc>r8FC1C3F7<_doc>rCAABF367<_doc>rEF8785FB<_doc>r59DA12D0<_doc>rB2896ACB<_doc>rF0F9814B<_doc>r69D46CCC<_doc>r73BA9156<_doc>r524BD8A8<_doc>r0DE54457<_doc>r958228C6<_doc>rF3C86185<_doc>r84EB6CAA<_doc>rFBB2E3FF<_doc>r0D53C2E1<_doc>r5D439799<_doc>rE78FB9B9<_doc>r239C88E8<_doc>rC1560F47<_doc>rDEABEAB7<_doc>r0653B4FF<_hsh>/** \n * @var integer $_merchantID Requerido 9 Identifica al comercio. Facilitado por la caja en el proceso de alta\n *//**\n * @var integer $_acquirerBIN Requerido 10 Identifica la caja. Facilitado por la caja en el proceso de alta.\n *//**\n * @var integer $_terminalID Requerido 8 Identifica al terminal. Facilitado por la caja en el proceso de alta.\n *//**\n * @var string $_num_operacion Requerido 50\n *//** \n * @var float $_importe Requerido 12 Importe de la operación sin formatear. Siempre será un número entero donde los dos últimos dígitos serán los céntimos de Euro.\n *//**\n * @var string $_tipoMoneda Requerido 3\n *//**\n * @var integer $_tipoMoneda Requerido 1 Actualmente siempre será 2\n *//**\n * @var string $_url_ok Requerido 500 URL completa. \n *//**\n * \n * @var string $_url_nok Requerido 500 URL completa. \n *//**\n * @var string $_firma Requerido 256 Es una cadena de caracteres calculada por el comercio.\n *//**\n * @var string $_cifrado Requerido 4 Valor fijo SHA1.\n *//**\n * @var integer $_idioma Opcional 1 Código de idioma.\n * \n * 1.- Español 2.- Catalán 3.- Euskera 4.- Gallego 5.- Valenciano\n * 6.- Inglés 7.- Francés 8.- Alemán 9.- Portugués 10.- Italiano \n * 11.- Sueco 12.- Danés 13.- Ruso 14.- Holandés 15.- Noruego\n *//**\n * @var string $_pago_soportado Requerido 3 Valor fijo SSL.\n *//**\n * @var string $_descripcion Opcional 1000 Campo reservado para mostrar información extra en la página de pago.\n *//**\n * \n * @var string $_pago_elegido Opcional Dependiendo de quien solicite los datos de la tarjeta. Si los solicita el comercio será SSL. Si los solicita el TPV será vacío o no viajará.\n *//**\n * @var integer $_pan Opcional 19 Nº de tarjeta del cliente. Este campo tendrá contenido sólo en el caso de que la caja haya autorizado al comercio a solicitar este tipo de datos. En caso contrario dejarlo sin contenido.\n *//**\n * @var string $_caducidad Opcional 6 Fecha de Caducidad. Formato AAAAMM. Este campo tendrá contenido sólo en el caso de que la caja haya autorizado al comercio a solicitar este tipo de datos. En caso contrario dejarlo sin contenido.\n *//**\n * @var integer $_cvv2 Opcional CVC2 de la tarjeta. Este campo tendrá contenido sólo en el caso de que la caja haya autorizado al comercio a solicitar este tipo de datos. En caso contrario dejarlo sin contenido.\n *//**\n * @var string Referencia Opcional 30 Si el comercio está realizando el pago de una compra el campo viajará sin contenido. Si el comercio está realizando la anulación de una operación, se informará con el valor correspondiente.\n *//**\n * Pasarela final a la que se conectara\n * @var string $_urlPasarela\n *//**\n * URL para conectarse a la TPV en produccion\n * @var string\n *//**\n * URL para conectarse a la TPV en desarrollo\n * @var string\n *//**\n * Clave de encriptacion\n * @var string $_clave_encriptacion Cualquier valor\n *//**\n * Asignar código comercio \n * @param integer $merchantid Código identificativo del comercio (Proporcionado por el Comercio).\n *//**\n * Asignar código entidad\n * @param string $acquirerbin Código identificativo de su Caja (Proporcionado por el Comercio).\n *//**\n * Asignar url_ok\n * @param string $urlok Es la URL determinada por el comercio a la que Cecabank devolverá el control en el caso de que la operación finalice \n * correctamente.\n * Esta URL no deberá¡ utilizarse para actualizar la operación como pagada en el servidor del comercio.\n *//**\n * Asignar url_nok\n * @param string $urlnok Es la URL determinada por el comercio a la que Cecabank devolverá el control en el caso de que la operación \n * no pueda realizarse por algún motivo.\n *//**\n * Asignar número de pedido\n * @param string $numoperacion Identifica para el comercio la operación, nº de pedido, factura, albaran, etc.… Puede ser alfanumérico\n * pero están prohibidos los caracteres extraños típicos como ¿,?,%,&,*,etc.\n *//**\n * Asignar importe a pagar\n * @param string $importe Importe a pagar, se puede especificar con comas y puntos (Ejm. 10,67 / 10.32)\n *//**\n * Asignar el tipo de moneda\n * @param integer $tipomoneda Es el código ISO-4217 correspondiente a la moneda en la que se efectúa el pago. Contendrá el valor 978 para Euros.\n *//**\n * Asignar el ID del terminal\n * @param string $terminalid Código identificativo de un terminal dentro de un comercio. Por defecto es 00000003\n *//**\n * Asignar URL de producción\n * @param string $urlpasarelaproduccion Url del entorno de producción\n *//**\n * Asignar URL de desarrollo\n * @param string $urlpasareladesarrollo Url del entorno de desarrollo\n *//**\n * Asignar entorno\n * @param string $entorno Asignar el tipo de entorno que usaremos para comunicarnos con la TPV (por defecto modo desarrollo)\n *//**\n * Clave de encriptación\n * @param string $claveencriptacion Utilizada para firmar las llamadas realizadas al TPV. Las claves son distintas en pruebas y en real. (Proporcionado por el Comercio).\n *//**\n * Generar la firma\n * @return string Este método construye la firma con los parámetros anteriormente asignados\n *//**\n * Asignar el nombre del formulario\n * @param string nombre Nombre del formulario\n *//**\n * Asignar el id del formulario\n * @param string idform ID del formulario\n *//**\n * Generar boton submit\n * @param string nombre Nombre y ID del botón submit\n * @param string texto Texto que se mostrara en el botón\n *//**\n * Iniciar redirección automática\n * @return string Se ejecuta la redicción automática por javascript\n *//**\n * Creacion del formulario\n * @return string Retorna el formulario para la TPV\n */<_rslv>stringstringstringstringstringintegerstringintegerstringstringstringstring.intval()$btnsubmit<_doc>rCE9F7BCC<_doc>r4D1382E2<_doc>rC74066E9<_doc>rC0C64D02<_doc>rC9578C37<_doc>rD13AE358<_doc>rE91FE97C<_doc>r6D8BD0E3<_doc>r226E62DB<_doc>r41F0D9A6<_doc>r16038DBE<_doc>r82A7CA31<_doc>rEBAB483F<_doc>r691CC902<_doc>r91743EE5<_doc>r64D285B3<_doc>rD70A8161<_doc>r679649EC<_doc>rA48D9B2F<_doc>r9E98EDF6<_doc>r9DD8BA40<_doc>r3FFED7CB<_doc>rF5F0161A<_doc>r597692EC<_doc>r22AAEA1E<_doc>rA88DECF8<_doc>r9669D0C4<_doc>rBECCD4BD<_rslv>stringintint$codeidiomastringstring$btnsubmit.intval()stringstringstringstring.trim()stringstringstringstring<_lns>1<_hsh>/**\n * Class Sermepa \n *//**\n * Constructor\n *//**\n * Asignamos el idioma por defecto 001 = Español\n *\n * @param $codeidioma codigo de idioma [Castellano-001, Inglés-002, Catalán-003, Francés-004, Alemán-005, Holandés-006, Italiano-007, Sueco-008, Portugués-009, Valenciano-010, Polaco-011, Gallego-012 y Euskera-013.]\n *//**\n * Asignamos que tipo de entorno vamos a usar si Pruebas o Real (por defecto esta en pruebas)\n *\n * @param string $entorno (pruebas, real)\n *//**\n * Retornamos la URL que va en el form para los pagos ya sea en pruebas o real\n *\n * @return string URL sermepa (real o pruebas)\n *//**\n * Asignamos el importe de la compra\n *\n * @param int $importe total de la compra a pagar\n * @return bool|float|int Retornamos el importe ya modificado\n *//**\n * Asignamos el tipo de moneda\n *\n * @param string $moneda 978 para Euros, 840 para Dólares, 826 para libras esterlinas y 392 para Yenes.\n * @throws Exception\n *//**\n * Asignamos el número de pedido a nuestra compra (Los 4 primeros dígitos deben ser numéricos)\n *\n * @param string $pedido Numero de pedido alfanumérico\n * @throws Exception\n *//**\n * Campo opcional para el comercio para ser incluidos en los datos enviados por la respuesta "on-line" al comercio si se ha elegido esta opción.\n * @param string $datoscomercio Datos del comercio.\n *//**\n * Asigmanos la descripción del producto (Obligatorio)\n *\n * @param string $producto Descripción del producto\n * @throws Exception\n *//**\n * Asigmanos el nombre del usuario que realiza la compra (Obligatorio)\n *\n * @param string $titular Nombre del usuario (por ejemplo Juan Perez)\n * @throws Exception\n *//**\n * Asignamos el código FUC del comercio (Obligatorio)\n *\n * @param string $fuc Código fuc que nos envía sermepa\n * @throws Exception\n *//**\n * Asignar el tipo de terminal por defecto 1 en Sadabell (Obligatorio)\n *\n * @param int $terminal Número de terminal que le asignará su banco.\n * @throws Exception\n *//**\n * Asignar el tipo de transacción por defecto 0 que es autorización (Obligatorio)\n *\n * @param int $transactiontype tipo de transacción\n * @throws Exception\n *//**\n * Nombre del comercio que será reflejado en el ticket del comercio (Opcional)\n *\n * @param string $nombrecomercio Nombre del comercio\n *//**\n * Si el comercio tiene notificación "on-line". URL del comercio que recibirá un post con los datos de la transacción (Obligatorio).\n *\n * @param string $url_notificacion Url para guardar los datos recibidos por el comercio.\n * @throws Exception\n *//**\n * Si se envía será utilizado como URLOK ignorando el configurado en el módulo de administración en caso de tenerlo (Opcional).\n *\n * @param string $url Url donde mostrar un mensaje si se realizo correctamente el pago\n *//**\n * Si se envía será utilizado como URLKO ignorando el configurado en el módulo de administración en caso de tenerlo (Opcional).\n *\n * @param string $url Url donde mostrar un mensaje si se produjo un problema al realizar el\n *//**\n * Asignar la clave proporcionada por el banco (Obligatorio)\n *\n * @param string $clave Clave proporcionada por el Banco\n * @throws Exception\n *//**\n * Tipo de Pago\n *\n * @param string $metodo [T = Pago con Tarjeta, R = Pago por Transferencia, D = Domiciliacion] por defecto es T\n *//**\n * Firma que se envía a Sermepa (Obligatorio)\n *\n * @throws Exception\n *//**\n * Firma que se envía a Sermepa SHA-256 (Obligatorio)\n *\n * @throws Exception\n *//**\n * Asignar el nombre del formulario\n *\n * @param string $nombre\n *//**\n * Generamos el Boto Submit\n *\n * @param string $nombre Nombre y ID del botón submit\n * @param string $texto Texto que se mostrara en el botón\n * @throws Exception\n *//**\n * Ejecutar la redirección automática al TPV\n *//**\n * Comprueba si la operación ha resultado satisfactoria\n *\n * @param array $postData Datos _$POST recibidos del TPV (url de notificación)\n * @return bool\n * @throws Exception\n *//**\n * Generamos el form a incluir en el HTML\n *\n * @return string\n *//**\n * Parseo a Float\n *\n * @param $ptString\n * @return bool|float\n */<_rslv><_lns>1<_rslv><_rslv>$data$parameter<_rslv>$data$parameter<_lns>1<_rslv><_lns>1<_rslv><_rslv><_lns>1<_rslv><_lns>1<_rslv><_lns>1<_rslv><_lns>1<_rslv><_lns>1<_rslv><_rslv>$combo1$x$x$tamfoto$tamfoto<_rslv>$oParent$Id$nIndexTCatalogo.oTienda.oCliente.getSuPVP()TPGconnectionTQuery$combo1$x$x<_rslv>$oParent$Id$nIndexTCatalogo.oTienda.oCliente.getSuPVP()TPGconnectionTQuery<_rslv><_lns>1<_rslv><_lns>3<_rslv>TPGconnection<_lns>2<_rslv>$oParentTPGconnectionTQuery$cUsu$cUsu$i<_rslv>$oParentTCabeceraTLineas$EstaPagadoTPGconnectionTQuery$oParent$nPortes$oParent$aRow<_rslv>$oConnectionTQuery.oCon.fetch_array()<_lns>1<_rslv>$nIndex<_doc>rF0D29124<_doc>rE5FB9EC8<_doc>rF1973B7F<_hsh>/**\n * @desc Clase padre de la que heredan todas las conexiones a distintos motores\n *//**\n* @desc Clase para conectar a Postgres \n*//**\n * @desc Clase para conectar a MySQL \n */<_rslv>.preg_replace()<_doc>rC1BBA4E7<_doc>r498A43CF<_doc>rDD2FFB28<_doc>r1E835FDA<_lns>7<_rslv>TEmpresaTClienteTPedidoTLoginTPGconnectionTCatalogoTComboTComboTComboTComboTComboTransporteTMenuFamiliasTPGconnection$oParent$oParent$oParent$oParent$n$n$oParent$n$nombre<_hsh>/**\n * @desc Carga familias en combo \n *//**\n * @desc Devuelve nº tarifa que se le aplica al cliente\n *//**\n * @desc Precio del cliente según su tarifa, sin Dtos ni IVA\n *//**\n * @desc Devuelve su dto, según ficha cliente y artículo\n */<_lns>1<_rslv>